How To Clean Hayward Salt Cell?

If you’re like most pool owners, then you rely on your Hayward salt cell to keep your water clean and clear. But what do you do when it starts to get dirty and covered in algae?

In this guide, we will show you how to clean a Hayward salt cell quickly and easily, so that your pool stays sparkling all season long.

A Hayward salt cell is an important part of your swimming pool’s filtration system. It helps to keep the water clean and clear by converting salt into chlorine. If your salt cell is not working properly, your pool will become cloudy and you will start to see algae growth.

In order to prevent this from happening, it is important to clean your Hayward salt cell on a regular basis.

Why Do You Need to Clean a Hayward Salt Chlorinator Turbo Cell?

There are many reasons salt chlorinators need to be cleaned on a regular basis. The most common reason is that the cell becomes clogged with calcium deposits. These deposits can reduce the amount of chlorine produced, and they can also cause the cell to work less efficient overall. In some cases, you may even need to replace your Hayward Turbo Cell if it becomes too clogged.

Some of the common symptoms that your Hayward Turbo Cell needs to be cleaned include:

  • The chlorine output decreases
  • The salt cell produces less chlorine
  • There is a decrease in the efficiency of the salt chlorinator
  • The salt cell needs to be replaced more often than usual

If you notice any of these symptoms, it’s time to give your Hayward Turbo Cell a good cleaning. Read on for our simple guide on How To Clean Hayward Salt Cell.

How To Identify a Hayward Turbo Cell Needs Cleaning?

There are a few things you can look for to know if your Hayward Turbo Cell needs cleaning.

  • The first is reduced chlorine production. If you notice that your pool’s chlorine levels are dropping, it could be because your salt cell needs cleaning.
  • Another thing to look for is scale build-up on the cell plates. This will cause the cell to work less efficiently and will eventually lead to reduced chlorine production.
  • If you notice either of these things, it’s time to clean your Hayward Turbo Cell. Fortunately, it’s a pretty simple process that only takes a few minutes.

How To Clean Hayward Salt Cell?

It is recommended that you clean your Hayward Turbo Cell every three to six months. Luckily, it’s a pretty simple process that only takes a few minutes.

To clean your Hayward Turbo Cell, you will need:

  • A garden hose with a nozzle
  • A brush with soft bristles (a toothbrush will work)
  • White vinegar
  • A clean cloth
  1. First, remove the salt cell from your pool’s filtration system. Next, attach your garden hose to the nozzle and turn on the water. Hold the hose over the top of the cell and allow the water to run through it for a few minutes.
  2. After a few minutes, turn off the water and add a cup of white vinegar to the cell. Let it sit for five minutes, then turn on the water and allow it to run through the cell again.
  3. After the vinegar has been flushed from the cell, use your brush to scrub away any remaining deposits. Finally, rinse the cell with clean water and dry it off with a clean cloth.
  4. Once you’re finished, you can re-install the cell in your pool’s filtration system. And that’s it. You’ve successfully cleaned your Hayward Turbo Cell and it is now ready to keep your pool water clean and clear all season long.

How To Remove The Hayward Salt Chlorinator Turbo Cell From The Pool?

If you need to remove your Hayward Turbo Cell from the pool for any reason, follow these simple steps.

  • First, turn off the power to your pool’s filtration system.
  • Next, locate the cell and unscrew it from the housing. Once it is loose, you can pull it out of the housing and set it aside.
  • To re-install the cell, simply reverse these steps. Screw the cell back into the housing and turn on the power to your pool’s filtration system.

That’s all there is to it.

When Do You Need Acid Wash The Hayward Salt Chlorinator Turbo Cell?

If you have tried the above steps and your Hayward Turbo Cell is still not working properly, you may need to acid-wash the cell.

Acid washing should only be done as a last resort and it is important to follow the instructions carefully.

Steps:

  • Turn off the power to your pool’s filtration system.
  • Drain the water from your pool.
  • Remove the Hayward Turbo Cell from the housing and unscrew the cap.
  • Pour a half-gallon of muriatic acid into a five-gallon bucket of water. Stir carefully.
  • Put on gloves and eye protection.
  • Slowly pour the acid solution over the cell, being careful not to splash it.
  • Allow the cell to soak for 15 minutes.
  • Rinse the cell with clean water and dry it off with a clean cloth.
  • Re-install the cell in your pool’s filtration system.

Cleaning your Hayward Turbo Cell is an important part of pool maintenance. By following these simple steps, you can ensure that your cell is working properly and your pool water is clean and clear all season long.

Tips For Preventing The Need For Hayward Salt Cell Cleaning In The Future

There are a few things you can do to prevent the need for frequent Hayward salt cell cleaning.

  • Use a pool cover. This will help keep debris out of the water and will reduce the amount of work your filtration system has to do.
  • Test your water regularly and adjust the chlorine levels as needed.
  • Backwash your filter regularly.
  • Clean your skimmer and pump baskets on a regular basis.

By following these tips, you can minimize the amount of work your Hayward Turbo Cell has to do and extend the life of the cell.

FAQs

There are some common questions that people have about How To Clean Hayward Salt Cells. Here are some of the most frequently asked questions:

Q: How often should I clean my Hayward Turbo Cell?

A: It is recommended that you clean your cell every three to six months.

Q: Do I need to drain my pool before I clean the cell?

A: No, you do not need to drain your pool. Simply remove the cell from the housing and rinse it with clean water.

Q: How can I tell if my Hayward Turbo Cell needs to be replaced?

A: If your cell is not working properly, it may need to be replaced. A qualified pool technician can help you determine if your cell needs to be replaced.

Conclusion

We hope this guide has been helpful. Here we have shown you How To Clean Hayward Salt cells. With a little time and effort, you can have a spotless cell in no time.

If you know of any other tips or tricks, please share them in the comments below. As always, happy swimming.

Also Read: How To Safely and effectively Clean Sunbrella Indoor Upholstery Fabric

Priya Singh

Hey readers! I'm Priya Singh Founder of (MercerOnline.com), I am full-time Digital Marketer, Organic Affiliate Marketer & a Blogger.

Leave a Comment