How To Make A Table Taller Diy?

 Are you also looking for “How To Make A Table Taller Diy?” 

If yes, then this is the right destination for you!

Every household must have tables. It gives room for essential marital decision-making, family dinners, conversations with friends, and kid-centered crafts. While doing these tasks, your comfort level is influenced by the height of your table, which is often not given much concern.

This blog will discuss “How To Make A Table Taller Diy” with different methods.

How To Make A Table Taller Diy?

With the appropriate tools, raising your table can be an easy project. To increase the height of your table, you can attach lifts, feet, or extensions to the legs. You can add wooden extensions to your wooden table to raise the legs. You can replace your table’s legs completely to guarantee you achieve the height you want.

Here, we will discuss three different ways. Let’s start.

Method 1 – Use Furniture Risers

Follow the below steps to raise table height with furniture risers –

  • To determine the size of your table’s legs, measure them.
  • Find your most comfortable table height by sitting at it.
  • Using these specifications, find the ideal fit for your table legs, then purchase. 
  • Once the risers are ready, put one under each leg at a time until all four are in place. Finally, you can work comfortably at your new table height.

Method 2 – Exchange The Table Current Legs with Taller Ones

It would help if you made the desk as appealing as possible because changing your current table legs for taller ones permanently alters it.

  • Find out more about the legs you want. If it’s made of wood, choose the proper wood for the desktop leg.
  • Once you’ve decided which table legs would work best for you, think about what height would be most comfortable. Sitting at your existing workstation, determine your most comfortable height, and then take measurements.
  • To purchase your new table legs, use the measurements.
  • From the table you want to change, take out the existing legs one at a time.
  • As per the manufacturer’s instructions, assemble the replacement legs. Depending on the legs themselves and the layout of your table, different tools, and installation techniques will be required.
  • To simplify installation, you might select a set of movable legs with a mounting plate that screws into the underside of your desk. These are simple to operate and often have a leveler you can turn to the correct height.
  • If you are experienced in woodworking and want greater creative control, you can purchase the components and create the legs from scratch.

Method 3 – Use Bun Feet

Follow the instructions below to modify your desk height once you’ve decided to utilize bun feet.

  • The first step is deciding how tall you want to be. Bun feet allow you to raise your desk height by 4 to 10 inches.
  • Online or at a nearby hardware store, purchase your favorite bun foot set. They ought to come in four-bun foot sets.
  • Under each leg, drill holes with a diameter of 0.25 to 1.25 inches. The proper diameter of each hole can be determined by looking at the bun foot.
  • Drill the holes, and then, one bun foot at a time, attach the feet firmly and securely.
  • If you want complementary colors, you can refinish the desk or paint the bun feet to match the color of your current desk. To increase the height of a hardwood table, use bun feet. Typically, they are spherical and between three and four inches tall.

Method 4 – Prefer Wooden Extension

Your table’s height can be increased by adding an extension to the legs. They are, therefore, a great manual method of raising the desk height.

  • First, collect the short pieces of wood. You can do this at a hardware store or, if you have one, in your workshop.
  • Make sure the pieces you choose for the extensions fit your desk’s legs’ width. Another option is the same type of wood used for your furnishings.
  • Mark the center of each leg on your desk by turning it over. Where you make holes is here.
  • Make holes where the wood pieces will be attached on the underside of each leg. There should be around 0.25 inches between each hole.
  • In each of the holes, place a tee nut. Use a hammer to insert them and ensure they are well placed.
  • Utilizing hanger bolts, fasten the wooden components together by tightening them with a screwdriver.

Conclusion –

After reading this blog, you can learn “How To Make A Table Taller Diy.” Here, we have discussed various methods. You can hassle-free go with anyone who resonates with you. I hope this blog will help you and that you can make your table taller.

Frequently Ask Questions (FAQs) –

  • What could I use for a table’s legs?

According to Bowling Artworks, tall wooden candlesticks, chair legs, or even bowling pins can be used as DIY table legs. Rolling pins or bowls placed open end to open end can all be given a second chance at life as furniture legs.

  • Can you make the table longer?

There are a few incredibly simple DIY tricks to extend any table, whether you need to seat extra guests for a holiday or give yourself more space to work. Your table can be made broader and longer to accommodate your needs by adding a plywood sheet or an additional folding table.

  • What do you call table extenders?

Company boards are another name for table extenders. If you encounter this phrase, it means the same thing. But breadboard ends are different from extenders. Although they look identical, breadboard ends are fixed to your table, making it impossible to shrink when guests leave.

  • Can furniture be given feet?

Remove the board, then indicate where to place the plates for the feet. The footplates should be attached to the board base’s corners. The fresh furniture is feet with screws. Make holes in the foundation and brace pieces of wood by marking and drilling them for the bolts.

  • A wooden chair can be made taller in what way?

A cheap approach to raising a dining chair’s height is wood blocks made especially for lifting furniture. Each chair leg should be supported by a wood block, which you should paint or stain to help them match the chair’s color.

Related Article:

Priya Singh

Hey readers! I'm Priya Singh Founder of (MercerOnline.com), I am full-time Digital Marketer, Organic Affiliate Marketer & a Blogger.

Leave a Comment