How To Fix A Bent Car Door Frame?

Make sure the damage is not too much. If the damage is too much, bring it in for repairs to a pro.

The frame should be raised so that its two sides are flush.

The next step is to separate the two pieces by removing any screws holding one side of the car door frame.

Make sure you drill the hole through the frame so the screw head may pass through to the opposite side.

Then tighten the four bolts using a 6mm Allen head wrench.

In the sixth step, you must put the metal backing. You can also use a hammer to fix it on the spot.

Repeat this procedure with the entire door frame unless you complete it.

At the last step, you have to check whether your door is fixed correctly or not.

Read The Complete Details Here!