How To Clean Brick Floors Indoors?

Although brick floors are relatively easy to maintain, they need a thorough cleaning. If not properly maintained, this sort of flooring can quickly become dirty. In fact, the dirt and debris stuck on the bricks can work as sandpaper, weakening the seal and disclosing the bricks.

Simply put, the dirt and grime can lead to floor degradation if not taken care of. If you’re regarding the information on how to properly clean brick flooring, you’ve arrived at the correct place. We’ve set a guide so you can clean brick floors indoors easily.

Vacuuming or Sweeping Brick Floor Indoors

To eliminate dust and grime, sweep or vacuum your brick flooring daily.

You can use a typical broom or a floor cleaning brush to clean. Since there is often more dirt and dust concealed underneath, pay particular attention to the mortar in the spaces between the bricks.

Moreover, you can use a hard floor vacuum kit for deeper cleaning the brick floor. You can employ a soft brush in the vacuum to remove any remaining tiny particles and pet hair.

Please note that beater bars and other harsh attachments may damage the sealing, brickwork, or cement, so it is best not to use them.

Mopping the Brick Floor

You can mop your brick flooring after vacuuming to give them a deep clean. It’s not as difficult as it seems:

For mopping, you will need:

  • A gentle Alkaline cleaner (You can either buy it from the store or DIY it). For DIY cleaner, you will need either 1 part vinegar mixed with 10-12 parts water or 2 tablespoons Borax/baking soda mixed with 1 gallon of water
  • Bucket
  • Mop
  • Towels
  • Stiff nylon brush

Now that you’ve picked an appropriate cleaner, it’s time to begin cleaning. If you decide on a commercial product, follow the label’s instructions for mixing the solution.

Start Mopping

To clean the brick flooring, always mop with a damp mop. Wring out the mop thoroughly after wetting it in the cleaning solution. A spinning mop can be the ideal tool for wringing out water since it wrings out most of the water effortlessly.

Now brush the mop back and forth on the bricks with somewhat more force than on other floor types. This way, you can access the narrow spaces between the bricks.

It is best to avoid using sponges or flat fabric mops because they won’t last very long on the hard surface of the brick floor. Pick a good mop with microfiber threads alternatively. Use a stiff nylon brush to wash away any difficult stains or grime.

You should keep an eye on water while mopping the floor. Consider discarding it and creating a fresh batch of the solution if it starts to appear murky or unclean. Using unclean water when mopping can change the outcome.

Dry the Floor

You can use a towel or soft cloth to dry up extra water after sweeping the floor. To prevent damage from residual water and cleaner, pay careful attention to the grout lines and cracks. Striking streaks or smudges can be avoided by completely drying the flooring.

Cleaning Brick Floor With Steam Cleaner

An excellent device to invest inĀ is a steam cleaner. They may be utilized on most indoor surfaces, including bathroom floors and kitchen countertops. If you need to clean spills and stains from brick floors, these devices are also fantastic at doing a thorough cleaning job.

Dirt, grime, and moisture will be blasted out of the bricks’ small holes by the heat from the cleaner. Additionally, it will assist in disinfecting them without using any chemicals and removing smells. When sealing or resealing your flooring, steam cleaning is an excellent way to condition surfaces.

How to deal With Brick Floor Dust?

Brick flooring occasionally has tiny dust and debris that appears to emanate from its surface when it is entirely new. This dust can make a lot of mess when you carry it to other surfaces by feet.

Typically, the application of muriatic acid to cleanse the brick after the first installation is to blame for this dust. If this acidic material is not thoroughly washed away, it may stay in the grout lines and result in the dusting effect.

The solution to this issue is as simple as repeatedly cleaning the floor with clean water to eliminate any remaining muriatic acid residue in the grout lines. Use a towel or a damp mop to do this, and keep doing it until there is no longer any dust.

How to Deal With Brick Floor Grout?

Taking Care of the Grout

The most delicate area of the brick flooring is the grout lines. Grout is incredibly absorbing and will soak away spills and fluids. Not only will this cause the grout to become stained, but it may also harm the brickwork.

The most straightforward technique to prevent anything from soaking into the grooves or bricks is to cover the grouting. Once a year, you should seal it to protect it.

If you see any stains or discoloration, you can use a commercial detergent to wash the grout. By mixing the same proportion of water and baking soda, you can also prepare and apply a mixture. You can use a grout brush to clean it, then wipe it down with a cloth to finish.

Grout lines can be thoroughly cleaned using a steam cleaner as well. Some sealers can be removed, though. In extreme circumstances, you might need to altogether remove the grouting and reapply it.

The Takeaway?

Brick flooring can have a retro feel and a lovely appearance in any rural or rustic property. Brick floors can take a little scrubbing, so cleaning them is not too difficult.

If you have this floor, dirt and grime are significant issues. It frequently has to be swept or vacuumed daily and deep cleaned with a wet mop once weekly. For added safety, seal your brick flooring, but be aware that the results may vary based on the sealant.

Priya Singh

Hey readers! I'm Priya Singh Founder of (, I am full-time Digital Marketer, Organic Affiliate Marketer & a Blogger.

Leave a Comment